EPO-TEK electrically conductive epoxies have been used successfully for over 35 years in a wide variety of applications including: IC packaging, hybrid microelectronics and circuit assembly as well as today in solar cell assembly, LEDs and high power management.
EPO-TEK Electrically & Thermally Conductive
01 Overview
Epoxy Technology offers a full range of electrically and thermally conductive epoxy adhesives for the semiconductor, optoelectronic, automotive, aerospace and electronic assembly industries. Our extensive product line allows users to easily select the optimal adhesive for their specific application; based on the bescombination of physical, electrical and mechanical characteristics.
02 Product list
| Name | Description | Technical data sheet |
EPO-TEK H20E |
Two components, 100% solid silver-filled epoxy system designed specifically for chip bonding in microelectronic and optoelectronic applications. It is also used extensively for thermal management applications due to its high thermal conductivity. It has proven itself to be extremely reliable over many years of service and is still the conductive adhesive of choice for new applications. It is also available in a single components frozen syringe.Epoxy Technology’s Epo-Tek® H20E has been used successfully for over 35 years in a wide variety of applications including LED, solar, high power management and HDD applications. | |
EPO-TEK EK1000
|
New generation, single component ECA with exceptional thermal conductivity for high power applications with a thermal conductivity value ranging from 12.6 to 22.0 W/m°K. | |
EPO-TEK EJ2189
|
New generation, two component ECA designed for low temperature curing from 23°C (ambient) to 80°C that exhibits superior adhesion to a wide variety of substrates including most metals, ceramics, glass and plastics. | |
EPO-TEK E2101 |
Two component, thixotropic, electrically conductive adhesive. It may be used for circuit assembly and semiconductor applications. | |
EPO-TEK E3001-HV |
Snap cure, single component, silver-filled die attach adhesive for semiconductor plastic IC packaging. It is also available in a frozen syringe. | |
EPO-TEK E4110 |
Electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other heat cures can be used. | |
EPO-TEK E2189-LV |
Low viscosity, two-component, room temperature curing conductive epoxy. | |
EPO-TEK EK1000 |
Single component, silver-filled adhesive that exhibits exceptional thermal and electrical conductivity along with a shiny silver appearance making it ideal for the demanding requirements of high power LED die attach applications. Other benefits include low viscosity and high thixotropy making it suitable for a wide range of application techniques. | |
EPO-TEK EM127 |
Single component, heat curable, electrically conductive epoxy adhesive for semiconductor IC and LED die attach applications. | |
EPO-TEK H20E-PFC |
Two components, semiconductor grade epoxy, designed for flip chip interconnects using a solder-free joining method. | |
EPO-TEK H20S |
Modified version of EPO-TEK®H20E, designed primarily for die stamping and dispensing techniques for chip bonding. EPO-TEK®H20S is a highly reliable, two component, silver-filled epoxy with a smooth, thixotropic consistency. In addition to the high electrical conductivity, the short curing cycles, the proven reliability, and the convenient mix ratio, EPO-TEK® H20S is extremely simple to use. | |
EPO-TEK H31 |
Single component, silver-filled, electrically conductive epoxy designed for semiconductor die attach applications found in hybrids, JEDEC, and opto-electronic packaging. | |
EPO-TEK H35-175MP |
Single component, silver-filled epoxy for military hybrid die and component attach. | |
EPO-TEK H37-MP |
Single component, electrically conductive, thixotropic silver-filled adhesive for die-attach and SMD attach inside hybrid microelectronic packages. It is also available in a frozen syringe. |
03 Complementary products
Volumetric valve
Revolution, the linear displacement valves from the series are the first MV valves incorporating a volumetric concept.
Viscotec-pharma & cosmetic
ViscoTec offers an ideal solution for high-precision and shear sensitive filling, conveying and metering of pharmaceuticals and fluids, from very liquid to highly viscous.
Valve without contact
The FCM100 is ideal for any low viscosity underfill, encapsulant, conformal coating, and micro dot or bead dispensing project.
Valve Controller SVC100
The SVC100 Valve Controller is a stand-alone controller used for the operation of SV series feeder screw valves
Valve Controller 700ETC
The 700ETC valve controller allows the dosing valves to be controlled manually (operator) or automated (machine).
THINKY SR 500
The SR500 allows to proceed to the immediate mixture of 500 grams of manufacturer dough to braze , without preliminary intervention.
THINKY PR-1 Nano pre-mixer
The THINKY PR-1 Nano Pre-mixer for nanoparticle dispersion and deagglomeration of CNT, graphene and other 2D nanomaterials is a patented design using a unique dual ultrasonic system to uniformly disperse nanomaterials before mixing into other materials.
THINKY Nano pulverizer NP-100
NP-100 is a nano pulverising material at low temperatures that has a minimum of 100 mg and can be pulverised in a short time
THINKY ARV 930 TWIN
The ARV 930TWIN is the only mixer to be had a double platform of mixture. Its reservoirs coupled of 500ml each confer him a maximal capacity of a liter.
THINKY ARV 5000
The planetary mixer ARV 5000 is a large model that handles large capacity of maximum 3L and achieves deaeration at the submicron level.