1. Home
  2. Author: admin

All posts by: admin

About admin

Thinky ARV 930 TWIN

The Thinky ARV 930 Twin employs a twin mixer system, and supports manufacturing application with the capacity to process a maximum 1L of materials. It is equipped with a vacuum function in order to achieve deaeration at thesubmicron level, thus it is possible to process uniform mixing and dispersion as well as deaeration at the same time. It has two deaeration modes as standard features: one is vacuum deaeration mode which combines 400G centrifugal force and vacuum, and the other is atmospheric pressure deaeration mode which utilizes powerful centrifugal force of maximum 670G.

This enables high precision deaeration even with materials that contain a volatile component that is not suitable for vacuum deaeration. Furthermore, time to reach vacuum is significantly reduced by adopting our unique in-cup-holder vacuum pressure reduction system that minimizes the vacuum volume.

janvier 17, 2017

Thinky ARV 5000

The ARV 5000 is a large model that handles large capacity of maximum 3L and achieves deaeration at the submicron level.

Features :

  • Large capacity of 3L・5kg.
  • No boiling over of materials during operation because the optimal recipe for material can be set.
  • Optimal setting according to materials is possible by changing the number of rotations.
  • Excellent operability with a touch panel.
  • Equipped with cooling function by rotation
  • Various containers are supported
janvier 17, 2017

Thinky SR 500

The SR500 can prepare uniform viscosity in a short time for solder paste just taken from cold storage without bringing it back to room temperature. Metal particles with high specific gravity, such as solder particles settle to the bottom of containers in cold storage, causes differences in material viscosity.

The SR 500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.
The SR 500 can immediately prepare cold stored solder paste without bringing it back to room temperature. By optimizing the mixing recipe, viscosity preparation and temperature preparation for solder paste is easy. It also removes large air bubbles in the paste, which are considered the cause of solder paste defects. It handles commercial 500g solder paste containers. It restirs and redisperses solder paste that has been used. Finally, it supports solder paste in syringes by using the optional adapter.

Features:

  • Can immediately prepare cold stored solder paste without bringing it back to room temperature
  • By optimizing the mixing recipe, viscosity preparation and temperature preparation for solder paste is easy.
  • Removes large air bubbles in the paste, which are considered the cause of solder paste defects.
  • Handles commercial 500g solder paste containers as is
  • Restirs and redisperses solder paste that has been used
  • Supports solder paste in syringes by using the optional adapter

 

janvier 17, 2017

Thinky ARC 40H

The THINKY ARC 40H syringe charger has been developed to fill syringes and barrels with mixed and deaerated material straight from the planetary centrifugal Deaeration Mixer while maintaining quality.
Because the filling operation is performed under vacuum pressure, mixing in of air bubbles is held to the minimum. Because multiple syringes can be filled at the same time, work efficiency can be improved and
upgraded. Also, because uniformly dispersed material can be filled at that quality, defects can be reduced at the time of potting which is thought to be caused by undispersed material and large air bubbles.

janvier 17, 2017

Thinky examples

Thinky mixes epoxy Thinky mixes solder paste
Epoxy resin
Epoxy resin, hardener and aluminium powder are mixed in 6.5 minutes. Ingredients are dispersed evenly.		 Solder paste
Creamy solder paste with no air bubbles is made from solder powder and flux. Processed with ARE-250 in 45 seconds.
See video See video
Thinky mixes cosmetics Thinky mixes ointments
Cosmetics
Ingredients for face cake, wax and coloured iron oxide, are mixed completely with the ARE-250 in 5 minutes.		 Ointment
It mixes yellow pigment into zinc oxide. Without solvent, it dispersed perfectly with the ARE-250 in 20 seconds.
See video
janvier 17, 2017

Thinky applications

Applications THINKY  Mixer VIscosity, Density,
Particle Volume or Size		 Datasheet
1 Ceramic (10 V%) Dispersion Defoaming ARE-250 2 minutes Barium Titanate – 6.02g/cm3 Micron particle, 10 volume %, (Total 120g) View
 2 Nano Ceramic (70 V%) Dispersion Defoaming ARE-250 3 minutes Aluminum oxide – 0.5µm Nano particle, 3.97g/cm3 50-70 volume % View
3  2 part Epoxy Mixing Defoaming  ARE-250 20 seconds Epoxy Part A: 3000-6000 poise Part B: 0.3-0.7 poise View
4 Carbon Nano Fiber (10V%) Dispersion ARE-250 3 minutes CNF-10 volume % Nano particle, Fiber View
5 Carbon Black 2 part silicone (20 wt%) Dispersion Defoaming ARV-310 1 minutes/ ARE-250 8 minutes Nano Carbon Black 20wt% (50V%) Nano particle (Total 120g) View
6 Silicone Potting Compounds Mixing Defoaming ARV-310 3 minutes Part A: 4000-8000 poise Part B: 200-700 poise (Total 10g) View
7 Precious metal paste Dispersion Defoaming  ARV-310 / ARE-250 from 30 sec. to 1 min  General silver filled condudctive epoxy / Jar and syringe application Highly dense metal powder View
8 Carbon NanoTube (1-2 wt%) Dispersion  ARV-310 6 min  CNT – 1-2 wt% Nano particle tube View
9 Zinc Oxide(10 V%) Dispersion Defoaming  ARE-250 6 min ZnO 10 volume % petroleum Jelly 0.85, Zinc Oxide 5.76 View
10 LCD ODF sealant (10V%) Dispersion Deforming ARV-5000 TWIN Au Ball 10 volume % sealant 400,000cP, Au ball 3µ View
11  Printing Ink Degas ARV-5000 Solvent Ink 450g View
12  Viscous Epoxy Defoaming ARE-250250AD-EFD-3×6 Epoxy 828 2.5cc in EFD 3cc Syringe View
13  Alumina Dispersion Defoaming  ARV-5000 Aluminum oxide – 20 volume % Silicone 3000cP View
14  LED Phosphor Dispersion Defoaming ARV-310+ Syringe Loader Phosphor 10 wt% Slicone 10,000cP 20g View
15 Viscous Epoxy Defoaming  ARV-310 + Syringe Loader  Various Epoxy sample View
16 Talc DispersionDefoaming  ARE-250  Silicone 60g – 30wt% Silicone 10,000cP  View
17  CNF (1%wt) Dispersion Defoaming  ARV-310  6min  CNF 1%wt  View
18 Suspension Particle Reduction  ARE-250 3min Phenytoin as API  View
janvier 17, 2017

Containers and Adapters

Containers and adapters are the key factors to achieve maximum performance !
THINKY designs original containers and adapters for planetary centrifugal mixers.

We create adapters especially suited for your containers :

THINKY provides the most suitable containers results in optimum material processing.
Moreover, we consider material characteristics, customers’ issues, and operating environment,etc.
to create the only one adapter for your material.
Fine response and attentive service are our strengths as a pure play company

janvier 17, 2017

Pistons

The pistons push the product while scraping the walls of the syringe. They also maintain the product in the syringe to prevent leakage from the needle.

  • No drip for thin to thick fluids
  • Right walls for very thick fluids
Available for all syringe sizes (3, 5, 10, 30, 55cc)

 

SIZE DRIPFLOW SW FLOW Qty/PACK
3cc O022051 O032051 50
5cc O023131 O033131 40
10cc O024171 O034171 30
30cc O026211 O036211 20
55cc O027211 O097211 15
janvier 16, 2017

EIT Powermap Plus

The UV PowerMAP® and UV MAP Plus™ measure UV irradiance, radiant energy density and temperature. The UV PowerMAP® simultaneously provides information for four spectral regions (EIT® UVA, UVB, UVC, and UVV) while the UV MAP Plus™ provides for any one spectral region. Both instruments also provide a plot of the UV irradiance and temperature as a function of time.

janvier 16, 2017

Nozzles

Perfectly adapted to cartridges, nozzles SEMCO® comes to complete an ultra-precise device. To answer better the specificities of your needs, they are available in a range of diameters and are certified without silicone. In spite of a tested rigidity, the specificity of nozzles SEMCO® is their modular extremity. Designed for an ergonomic use, they are molded in a flexible plastic and allow you to choose the best shape for your application.

PART SIZE (cm) ORIFICE (cm) DENSITY
2205382
2.5
0.063
Low
2205402
2.5
0.125
Low
2286222
2.5
0.125
High
2205422
4
0.031
Low
2276132
4
Sans orifice
Low
2205442
4
0.063
Low
2286232
4
0.063
High
2205482
4
0.094
Low
2205502
4
0.125
High
2222782
4
0.125
Low
2205532
6
0.063
Low
2205552
6
0.125
Low
2244942
6
0.375
Low
2205572
8
0.063
Low
2205592
8
0.125
Low
2205610
10
0.063
Lo

* The most common references: many other models available

janvier 15, 2017