UV curing
RX Fireline UV Curing LEDs
The FireLine is a scalable water cooled UV LED curing lamp with uses in a wide variety of web/conveyor based UV curing applications. The FireLine architecture is designed to allow the systems to be scalable up to 2m in length.
RX FireFlex UV Curing LEDs
The RX FireFlex is designed as a scalable « high power » water cooled UV-LED curing lamp aimed primarily at high performance/high speed single pass UV inkjet applications but with utility in a wide variety of web/conveyor based UV curing applications.
RX FireJet UV Curing LEDs
The RX FireJet is a high capability air cooled UV-LED curing lamp aimed primarily at UV Inkjet wide format systems and is capable of curing at the highest speeds for small, medium and grand format digital printing systems.
RX FireFly UV Curing LEDs
The Phoseon FireFly is an air cooled small form factor UV LED curing lamp with peak intesities from 1.5 up to 8W/cm2.
RX FireEdge UV Curing LEDs
Phoseon products are offered in two main cooling configurations.
EIT Microcure
EIT®’s MicroCure® measurement system is comprised of two separate stand-alone items; the data collection radiometer which is placed in the ultraviolet (UV) environment to be measured, and a DataReader which reads and displays the measurement results from the radiometer.
EIT Compact Sensor
This small, robust, stable sensor is highly resistant to solarization. Sensors have sealed optics to prevent fouling and an optional air/nitrogen purge to keep the sensor clean and cool. Sensors connect to all of EIT’s online monitoring electronics. A 0-10V and a 4-20 milliamp signal output is generated for each Compact Sensor when used with one of EIT’s conditioning units such as the Din Rail, MultiBrite or Online UV Intensity Display. These output signals can be interfaced to a PLC or other control system. Available in a choice of several UV bandwidths (A, B, C & V).
PowerPuck II Profiler
The “Profiler” versions of their Power Puck II and UviCure Plus II function as a standard Power Puck II or UviCure Plus II instrument while adding the ability to transfer the collected data and irradiance profile to a computer via a USB connector. The transferred data can be analyzed with EIT’s PowerView Software® II which allows the user to easily compare files to look at the conditions, lamp focus and lamp type. PowerView Software® II adds several new features including the ability to analyze a single UV band and data from four individual files in graph and data format, easily transfer screen shots for reports and the ability for users to add file information via a custom template.
EIT 3D Sensor
Quickly and easily profile dimensional and shaped objects of any size with EIT®’s 3DCure ™ Multi-Dimensional Measurement System. The system can produce up to 32 simultaneous measurements, which is perfect for setup and process verification of your UV lamp system. 3DCure ™ can be used with UV lamps mounted in a fixed bank or on a robotic arm. The collected exposure data (W/cm2 and J/cm2) for each sensor is displayed on your computer with the included Cure 3D™ software. The software supports ActiveX® controls and allows customization and export of the data into other programs. The use of ultra-violet curing on dimensional and shaped objects continues to grow. UV cured coatings offer several advantages over solvents and/or water-borne coatings pressed thermally or with IR. Line design, source placement and/or orientation, documentation of process limits and monitoring production conditions challenge users switching to UV curing tehnology. The 3DCure from EIT® addresses these challenges in a simple, flexible and easy to use measurement system. The UV irradiance (W/cm²) and energy density (J/cm²) arriving at multiple points on the cure surface can be easily and simultaneously measured.