The new Lumen Dynamics R2000 Radiometer can be combined with the OmniCure™ S2000 to provide a complete curing system with unmatched control and repeatability. Special electronics built into the R2000 Radiometer allow for connection of custom sensors for measuring light energy directly at the cure site.
- Home
- UV curing
- UV spot cured
- OmniCure Radiometer R2000
OmniCure Radiometer R2000
02 Features
Communication with OmniCure™ Series 2000 to set irradiance levels and calibrate system
Proprietary detector system for accurate wideband measurements
Proprietary optical interface that virtually eliminates beam profile dependence
Light Guide detector and color coded adapters to insure accurate measurements
Memory for storing data with PC software for downloading
The Lamp Output Adapter is an accessory that allows you to measure the UV output without a light guide.
03 Complementary product
RX StarFire MAX UV Curing LEDs
The RX StarFire MAX is a water cooled high intensity UV curing lamp with configurable emitting lengths of 75mm, 150mm & 300mm with an emitting width of 20mm.
RX FirePower UV Curing LEDs
RX FirePower is a water cooled curing lamp specifically designed to address the needs of UV-LED curing in the printing press market where total UV power delivered is a key parameter based on high speed printing requirements.
RX Fireline UV Curing LEDs
The FireLine is a scalable water cooled UV LED curing lamp with uses in a wide variety of web/conveyor based UV curing applications. The FireLine architecture is designed to allow the systems to be scalable up to 2m in length.
RX FireJet UV Curing LEDs
The RX FireJet is a high capability air cooled UV-LED curing lamp aimed primarily at UV Inkjet wide format systems and is capable of curing at the highest speeds for small, medium and grand format digital printing systems.
RX FireFly UV Curing LEDs
The Phoseon FireFly is an air cooled small form factor UV LED curing lamp with peak intesities from 1.5 up to 8W/cm2.
RX FireFlex UV Curing LEDs
The RX FireFlex is designed as a scalable « high power » water cooled UV-LED curing lamp aimed primarily at high performance/high speed single pass UV inkjet applications but with utility in a wide variety of web/conveyor based UV curing applications.
RX FireEdge UV Curing LEDs
Phoseon products are offered in two main cooling configurations.
PowerPuck II Profiler
The “Profiler” versions of their Power Puck II and UviCure Plus II function as a standard Power Puck II or UviCure Plus II instrument while adding the ability to transfer the collected data and irradiance profile to a computer via a USB connector. The transferred data can be analyzed with EIT’s PowerView Software® II which allows the user to easily compare files to look at the conditions, lamp focus and lamp type. PowerView Software® II adds several new features including the ability to analyze a single UV band and data from four individual files in graph and data format, easily transfer screen shots for reports and the ability for users to add file information via a custom template.
OmniCure S2000 UV Curing Spot Curing
The last model of the platform of polymerization OmniCure® possesses remarkable commands and lamp of 200 W.
OmniCure S1500 UV Curing Spot Curing
The second model of the family OmniCure ®, S1500 is equipped with a lamp of 200W with a life expectancy protected from 2000 hours. Ideal for the manual or automated applications, this system is very complete.